# Basic game making concepts: What you need to know to start with GDevelop

## Showing things on the screen: the Objects

Everything that is displayed on the screen is called an “Object”. Different kind of objects can be used to display different game elements on the screen. For example, most game graphics are “Sprite” objects, texts can be displayed with “Text” objects and special effects like a fire or sparks can be created with “Particle Emitters”.

## Positioning Objects in the world: Coordinates

Objects on the GDevelop screen/scene have X and Y coordinates. These coordinates correspond to the horizontal position (X-axis) and the vertical position (Y-axis) on the Cartesian plane.

The X-coordinate decreases as you go to the left and increases as you go to the right. The Y-coordinate increases as you go down and decreases as you go up.

In order to move or rotate objects, you will need to specify the desired angle in degrees. The illustration below demonstrates how GDevelop understands the angle of rotation:

The below gif shows both of these concepts used within the engine, modifying the X and Y position and rotation of the ship sprite object. Note that the top left corner of your game's default screen, the screen position when no camera movement has been applied, is where X=0 and Y=0.

Note that angles can be negative too. For example, -90 degrees is equal to 270 degrees.

If you use trigonometric functions like the sine or the cosine, you will need to express the angles in radians. (1 radian = 180/PI degrees and 1 degree = PI/180 radians. PI is the number which is approximately equal to 3.14159).

## Events and how objects are selected by these Events

Events, that you use to create the rules of your game, are composed of conditions and actions. Most conditions and actions refer to objects:

• Conditions run a test on the objects.
• Actions manipulate the object. They can change the object position, appearance, etc…

An action, without a condition, refers to all objects. If you use an object for the first time in an event, GDevelop will test or modify all objects with this name in the scene. If you use the object in the same event again, GDevelop will test or modify only the objects which have been picked by the previous conditions.

For example, this event has no condition. It will delete all objects called “Square”:

The event below has a condition. It will delete only the “Square” objects with an X position that is less than 100 pixels:

See it in action! 🎮Open this example online: https://editor.gdevelop-app.com/?project=example://object-selection

## Events: the order is important

The order of events does matter!

Events at the top are executed first. Events are executed every time your game is displayed. This display is called a frame. It executes about 60 times per second. The following examples are not equivalent:

• The first pair of events actions create a “Square” object at coordinates X: 100. Y: 200 (100;200). Then the event deletes the created square immediately. No “Square” is displayed on the screen. It's deleted just after being created.
• The second pair of events actions deletes all the “Square” objects from the scene/screen. It then creates one “Square” at the scene/screen coordinates X: 100, Y: 200 (100;200). This event shows a square is visible on the scene (before being deleted at the next frame. It will, then, be recreated immediately.

## Behaviors: pre-defined rules and logic for objects

Behaviors enhance an object with some pre-defined logic. They can be reasonably straightforward, automating simple tasks, or much more advanced tasks. For example:

• A behavior can be used to automatically remove an object from the game when it goes out of the screen (limiting the game memory usage).
• Another behavior can be used to move objects on the screen with the keyboard arrows.
• Yet another behavior can be used to allow the object to be dragged on screen with the mouse or by touching the object.
• The Physics behavior is an example of an advanced behavior which make your objects move in a realistic way, following the laws of physics.

Objects and Behaviors can be manipulated using events. You can read the pages about Objects and Behaviors to know more about them.

You can create custom behaviors for your objects. We recommend this as your game grows. It allows you to put logic about what your objects are doing in the custom behaviors, rather than bloating the scene's events sheet. You read more in this article.

## Moving objects: using the built-in forces

Moving objects can be achieved with forces. Forces are used to “push” objects.

You can specify:

• the coordinates of a force on the X and Y axis, in pixels,
• or its polar coordinates (the force angle, in degrees, and length, in pixels),
• if the force is instant (will only push “a bit” the object) or continuous (will keep pushing the object until it's removed).

### Example

Say you want to move an object towards the bottom:

You can add a force using X/Y coordinates by specifying 0 for the X coordinate and, say, 150 pixels for the Y coordinate. You can also use polar coordinates and add a force with an angle of 90° and a length of 150 pixels.

### Other ways of moving objects

Some “behaviors”, like the Physics engine or Pathfinding, may move the objects by themselves. In this case, it is better not to use the built-in forces system and instead rely only on actions provided by these behaviors.

These other ways of moving objects are explained in this how-to page.

## Storing any information in memory: Variables

A Variable allows you to store data. For example, a variable can store a number or a text. We might compare them to drawers or boxes where we can file notes. Any data can be stored in a variable, as long as it is in text or number format. Such things as the number of lives a player has remaining, a player's high score, the number of bullets left, and/or the number of enemies killed are all examples of what can be stored in a variable. You are probably going to store numbers in variables as a common practice.

Actions and conditions test or change a variable value.

#### Where are variables stored? (variable "scope")

The scope of a variable determines the place a variable can be accessed. In GDevelop, there are three variable scopes are available:

• Global variables are accessible from all the game scenes. For instance, they can be used to store the player's score across different levels/scenes.
• Scene variables are only accessible from the scene they are created in. They can be used for data that only concerns one scene. A Scene variable would be able to access the time remaining to complete the level/scene.
• Object variables only concern one object. For example, a hero can have a “Health” or “Ammo” variable.
Read more about variables on the Variables page. Variables are used a lot in games: most examples use them and tutorials will make use of them too.
Want to see how variables are used in a video tutorial? Check this tutorial: Variables explained for Non-programmers.

## An advanced notion: the "time elapsed" since last frame (TimeDelta)

The game evaluates events and repaints the screen several times per second: we say that the game is refreshed, updated during a “tick”. How often this happens depends on your computer resources: a slow computer can render 25 frames per second, a fast one 60. GDevelop can usually make sure that this value is the same on all computers. However, the speed of some operations can change from computer to computer, for example, mathematical operations and the rendering of movements.

To make the speed of changes constant, use the `TimeDelta()` expression, which returns the time in seconds since the last frame. For example, don't do this:

As GDevelop will run your game at a maximum of 60 images per second, you usually won't notice an issue if you're using the first event. It's still a good idea to keep an eye on this and use the version with `TimeDelta()` instead.